Vilo Fronto V Black – Golden Oak

The Vilo Fronto V Black Golden Oak is an external panel used to build a horizontal slatted façade across building surface. The panel provides golden oak slats with black groove lines, which emphasises the separation between each section of the cladding. This contrast allows the timber-effect boards to stand out clearly across the wall.

Visually, multiple slatted sections step forward from the panel body to form the façade profile. The dark backing layer remains visible behind these slats, offering shadowed channels that highlight the spacing between each board. They also project 12mm from the panel’s body to form the stepped surface.

Each panel measures 2.95m in length. This allows the boards to extend across larger sections of wall with fewer vertical joints. The board measures 283mm across its full width before installation, which means the installed coverage is reduced to 250mm once the next panel locks into position. The boards are manufactured from PVC and designed for outdoor weather.

The upper edge of the panel forms the fixing strip used to secure the board to supporting battens behind the cladding. The lower edge then engages with the previous panel, allowing the cladding to run along the entire wall. We recommend that we routinely inspect that the fixings remain secure. Avoid harsh abrasives while cleaning and use water and mild detergent to remove dirt builds up. Also confirm that the interlocking joints remain seated along the full length of the cladding run once installed to maintain a secure and continuous façade.